Inputs 13&14
-
How do I connect Inputs 13 & 14 to my RPi2 and mervis
-
How do I connect Inputs 13 & 14 to my RPi2 and mervis
-
It is a little bit complicated…
Mechanically the same way as here: http://unipi.technology/wiki/Inputs_13,14 Choose the GPIOs of RPi, mount the FS as readwrite (mount -o remount,rw) configure evok as discussed here: viewtopic.php?f=7&t=94 and than you need to customize the device on the TCP modbus channel in Mervis to add the rest two DIs and its counters...
-
But I do not use Evok
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đź’—
Register Login