Siemens LOGO 8
-
Is it possible to retrieve values from a Siemens LOGO 8 and read into Mervis then make a HMI
Siemens LOGO 8 has network connection with TCP / IP

-
Is it possible to retrieve values from a Siemens LOGO 8 and read into Mervis then make a HMI
Siemens LOGO 8 has network connection with TCP / IP

-
Hello, communication with Logo is not natively supported….
-
Ok

-
Probably too late for the party but still I'd like to mention that this is possible with REX Control System.
Jaroslav
-
Ok thanks will check it then
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login