• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Mervis minibian jessie wifi support

    Scheduled Pinned Locked Moved Mervis
    5 Posts 1 Posters 4.2k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      BlackSoll
      last edited by

      I have tried all the following without any success :

      apt-get update
      apt-get install nano sudo
      apt-get install firmware-realtek
      apt-get install wpasupplicant

      Tried to proceed with usual wifi configuration, editing my /etc/network/interfaces but no luck at all.

      How can i add my wifi adapter to mervis minibian ?

      1 Reply Last reply
      Reply Quote 0
      • B
        BlackSoll
        last edited by

        I have tried all the following without any success :

        apt-get update
        apt-get install nano sudo
        apt-get install firmware-realtek
        apt-get install wpasupplicant

        Tried to proceed with usual wifi configuration, editing my /etc/network/interfaces but no luck at all.

        How can i add my wifi adapter to mervis minibian ?

        1 Reply Last reply
        Reply Quote 0
        • ?
          Guest
          last edited by

          The system is set to read only in order save the SD card as much as possible.

          Support for some wifi dongles is already built in, also the wpa supplicant - see /etc/wpa_supplicant.conf

          But before you can modify the file, you need make the sd card writable by:mount -o remount,rw / Then edit the conf file or install other things and make the fs readonly by:```
          mount -o remount,ro /

          1 Reply Last reply
          Reply Quote 0
          • B
            BlackSoll
            last edited by

            First i```
            mount -o remount,rw /

            Then i```
            apt-get install nano
            ```cause i like it.
            
            My /etc/network/interfaces looks like this :
            
            

            #! /bin/sh false
            auto lo
            iface lo inet loopback

            ifup/ifdown of eth0 is driven by netplug daemon.

            by checking ethernet carrier (net card must by plugged into switch/other$

            eth1 is prepared for Huawei 3g modem in cdc-ether mode

            wlan0 is prepared for Wifi (usb)card

            #############################################################
            #auto eth0 #not needed if allow-hotplug or netplug is acti$

            allow-hotplug eth1 wlan0 # autostart on plugging !!!! MUST BE ONLY ONCE $

            source /etc/network/if-eth0.conf

            iface eth0 inet6 auto

            iface eth1 inet dhcp

            iface wlan0 inet dhcp
            pre-up wpa_cli -i wlan0 terminate 2>/dev/null || true
            pre-up /sbin/wpa_supplicant -B -q -c/etc/wpa_supplicant.conf -iwlan0
            post-down wpa_cli -i wlan0 terminate 2>/dev/null || true
            #wireless configuration is in /etc/wpa_supplicant.conf

            allow-hotplug wlan0

            iface wlan0 inet manual
            wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
            iface default inet dhcp

            
            Then i```
            chown root /etc/wpa_supplicant/wpa_supplicant.conf
            
             /usr/bin/wpa_passphrase myssid mypass > /etc/wpa_supplicant/wpa_supplicant.conf
            

            When iiwlist wlan0 scani found my wifi network then i```
            mount -o remount,ro /

            1 Reply Last reply
            Reply Quote 0
            • ?
              Guest
              last edited by

              Hello,

              then you also need to tell the system to connect to the network:

              wpa_supplicant -Dwext -iwlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
              

              You might also want to automatically reconnect to the network, this can be done using the provided script:

              • Go to /etc/ifplugd/action.d/ and rename the ifupdown file to ifupdown.original

              • Then do: cp /etc/wpa_supplicant/ifupdown.sh ./ifupdown

              1 Reply Last reply
              Reply Quote 0

              Hello! It looks like you're interested in this conversation, but you don't have an account yet.

              Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

              With your input, this post could be even better 💗

              Register Login
              • First post
                Last post