• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Upgrading old firmware on Neuron M103

    Scheduled Pinned Locked Moved Neuron Series
    6 Posts 2 Posters 1.3k Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ntdN
      ntd
      last edited by ntd

      Hi all,
      I need to use an old Neuron M103, so I downloaded the latest Neuron image (neuron64-base-os_12.20251103.1.img), burned it and booted.
      After logging in with ssh, I did an apt update && apt dist-upgrade and the following message appear:

      #########################################################################
      #########################################################################
      
                             Firmware upgrade available
      
      Current firmware in your PLC (5.5) should be replaced by
      the newly installed one (7.18~bookworm).
      
      Bootloader needs to be updated.
      
      For more information see the built-in help or our KB:
         /opt/unipi/tools/fwspi
         https://kb.unipi.technology/en:sw:04-unipi-firmware#firmware
      
      Reboot the PLC unit after the update.
      
      WARNING: Do not disconnect the power supply during the update,
               as it may lead to a permanent board damage.
      
      #########################################################################
      #########################################################################
      

      Trying to follow the instructions, I did an upgrade:

      root $ /opt/unipi/tools/fwspi -u 1 -Uv
      # The following did not work: that device did not exist
      # sudo /opt/unipi/tools/fwserial -p /run/unipi-plc/by-sys/rs485-1/tty -u 15 -Uv
      

      But now, turning back to the update section after a reboot, I get:

      root $ /opt/unipi/tools/fwspi -u 1
      WARNING! Bootloader only mode. UPDATE FIRMWARE!
      Bootloader: 6.0 (for 0-1 B-1000)
      Baseboard: 255-15 Unipi hw
      root $ /opt/unipi/tools/fwspi -av
      fwspi: Version 2.18.0
      

      What am I supposed to do?

      1 Reply Last reply
      Reply Quote 0
      • ntdN
        ntd
        last edited by

        It seems I've been able to update the second unit successfully:

        root $ /opt/unipi/tools/fwspi -u 2
        Firmware:   7.18 (for 1-1 E-8Di8Ro)
        Bootloader: 7.18
        Baseboard:   1-1 E-8Di8Ro
        

        Trying to "reset the configuration" (whatever that means) on the first unit shows scary messages without useful results:

        root $ /opt/unipi/tools/fwspi -u 1 -PRv
        fwspi: Version 2.18.0
        WARNING! Bootloader only mode. UPDATE FIRMWARE!
        Bootloader: 6.0 (for 0-1 B-1000)
        Baseboard: 255-15 Unipi hw
        Loading image: /opt/unipi/firmware/00-1.img
        Sending 31 pages.
        0000 E E E E E Cannot write page 0
        
        root $ /opt/unipi/tools/fwspi -u 1
        WARNING! Bootloader only mode. UPDATE FIRMWARE!
        Bootloader: 6.0 (for 0-1 B-1000)
        Baseboard: 255-15 Unipi hw
        
        1 Reply Last reply
        Reply Quote 0
        • ntdN
          ntd
          last edited by

          Any chance to get any feedback? I really need to use that PLC in the near future.

          C 1 Reply Last reply
          Reply Quote 0
          • C
            cleve administrators @ntd
            last edited by

            @ntd said in Upgrading old firmware on Neuron M103:

            Any chance to get any feedback? I really need to use that PLC in the near future.

            Hello,
            this looks like damage of the MCU itself, the only way to fix it is sending the device for service repair.

            Best regards,
            Kryštof Černý - Unipi engineer

            ntdN 1 Reply Last reply
            Reply Quote 1
            • ntdN
              ntd @cleve
              last edited by

              @cleve Many thanks for the feedback, I'll contact the service repair directly.

              Related to that: I have another Neuron M103 of the same age hanging around (2019 circa), but now I don't want to risk updating the firmware. Is there any drawback on using that PLC with latest neuron image while keeping the old firmware?

              C 1 Reply Last reply
              Reply Quote 0
              • C
                cleve administrators @ntd
                last edited by

                Hello @ntd,
                there should be no stability issues with the old firmware, some features might be absent and there may be some bugs, but if you test it and it works fine, it should be okay.

                Best regards,
                Kryštof Černý - Unipi engineer

                1 Reply Last reply
                Reply Quote 1

                Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                With your input, this post could be even better 💗

                Register Login
                • First post
                  Last post