How to configure wlan0
-
Hello,
I have just installed Base OS x64.
The ssh access via eth0 works but I can't configure wlan0.
I see that the configuration file /etc/wpa_supplicant/wpa_supplicant.conf usually found on Raspbian does not exist on Base OS.
I've tried editing /etc/wpa_supplicant/wpa_supplicant-wlan0.conf but it still doesn't work.Do you have a solution for me?
-
@paolo
Hello, the problem is that the wlan0 interface is disabled on our units in U-Boot by default. Those are steps to enable and configure the Wi-Fi interface:Set up the Wi-Fi parameters:
sudo nano /etc/wpa_supplicant/wpa_supplicant-wlan0.confEnable wlan0 in U-Boot
cd /etc/bootcmd.d/ sudo make enable-wifiSet up management (DHCP) on wlan0:
sudo cp /etc/systemd/network/examples/10-wlan0.network.example /etc/systemd/network/10-wlan0.networkA reboot is required to reflect the changes in U-Boot:
sudo reboot -
@cleve How can I configure IPv4 on eth0? In the previous version, there was a dhcpcd.conf file inside /etc/dhcp/. Should I create this file, or is there another method to set a static or dynamic IP on the Ethernet port?
Greetings
Thanks
Riccardo -
@riccardooo
Hello,
it would be better if you create a separate thread for an unrelated issue next time. Our systems use systemd-networkd, it's a standard GNU/Linux daemon, you can refer to Debian/Arch Linux manuals.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login