Pt1000 - NeuronL503 - Mervis
-
Hi all,
I've been reading all possible documentation but it is still not clear what the correct and best/easiest way is to connect a Pt1000 probe to my NeuronL503 controlling it with Mervis.
- Pt1000: Datasheet
I've tried different things, but it never comes close to either the resistance value or temperature.
Any tips/ examples?
Thank you.
Kind regards,
Olivier -
Hello @OlivierP
the first thing is to configure the AI to measure resistance as described on https://kb.unipi.technology/en:sw:01-mervis:analog-inputs-hidden
Once that is done go to the same Properties Panel of the AI and choose transformation Lib.Core.V1_0.ResistanceToTemperature and then proper Kind of the transformation (used sensor).
More on that in the built-in Help of Mervis IDE acessible in the upper menu Help or by pressing F1 and search for "Variable transformation, configuration of analogue inputs"
-
Hi @tomas_hora ,
Thanks, I was able to get it up and running. It is working nicely together with the PI controller to controller the compressor speed of a small cooling set-up for an indoor farm testing unit.
-
@OlivierP Thanks for the feedback!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login