Cycle time PLC program
-
Hello,
how can i measure the cycle time of my PLC program? -
Hello @holzenbein,
you can see this value in the "System status" tab while you're in Debugging mode. You don't have this value available as a variable.Best regards,
Martin -
Hello Martin,
thank you for your responce.
Is it possible to make a screen shot of the 'system status' and mark the 'cycle time'
What is the value in msec or in sec? -
Hello @holzenbein,
it is on the last row under section "task". The value is in seconds, otherwise it would mean the cycle time is e.g. 10 microseconds, which wouldn't be possible.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login