Firmware update problem
-
After upgradin firmware from version 5.x to version 6.x on Patrol L207 I lost all the digital inputs and relay outputs (onewire devices are still visible).
I tried to upgrade the firmware again with
sudo /opt/unipi/tools/fwspi -u 1 -Uvbut it ends in error:
fwspi: Version 2.18.0 Firmware: 58.215 CAL (for 115-3 Unipi hw) Bootloader: 0.0 Baseboard: 46-9 Unipi hw Cannot do upgrade. Try normal update.If I try to upgrade the firmware with
sudo /opt/unipi/tools/fwspi -u 1 -Pvit ends with fw imafge can not be found:
Firmware: 58.215 CAL (for 115-3 Unipi hw) Bootloader: 0.0 Baseboard: 46-9 Unipi hw Loading image: /opt/unipi/firmware/115-3C.img Cannot open file /opt/unipi/firmware/115-3C.img Cannot load firmware binary.Any ideas what went wrong and how to fix it (if possible).
-
Hello @lukec,
I have sent you an e-mail with further questions.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login