node-red startet nicht mehr
-
Re: How to connect Unipi 1.1 to DS18B20 Sensor
"Use Evok and Unipi node(s) to read data from sensors in Node-RED - then follow this tutorial. This is the default state.
Disable 1-Wire support in Evok (comment the OWBUS section in /etc/evok.conf), enable the module loading( add/uncomment "dtoverlay=ds2482" in /boot/config.txt), and use some other nodes (e.g. the one meant in your post) to access the 1-Wire bus."Hallo
beim auskommentieren von OWBUS und einfügen von dtoverlay=ds2482 ,startet node-red nicht mehr
Udo
-
@udokra said in node-red startet nicht mehr:
.
Disable 1-Wire support in Evok (comment the OWBUS section in /etc/evok.conf), enable the module loading( add/unWhat are you trying to accomplish with devicetrees? This is the oposite what you should do in order to have it working with Evok.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login