https redirect
-
Hi,
I'm using IDEv2.5.0 with an Axon M505. I want to disable http access to the HMI and redirect http to https, so I've set the Networking configuration as shown. Neither seems to work. I'm still able to access the PLC over http despite uploading the configuration and deploying the solution with a cold restart. Is there something else I need to do or do these options just not work?

Thanks
-
@Matt
Hello,
I have tested this and you are probably right, those options seem to be not implemented. However, I was able to disable HTTP on a testing branch of Mervis. This version will be released later this year. As a solution for now, you can try using HTTPS only mode in your browser.Best regards,
Kryštof Černý
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login