• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    NodeRed image-20220412.0 broken?

    Scheduled Pinned Locked Moved Node-RED
    2 Posts 1 Posters 1.1k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      rob
      last edited by rob

      Hi,

      I just downloaded the neuron-node-red_image-20220412.0 image from the website and flashed it on my neuron S103 (S/N 119).
      It starts up fine, but then I see no inputs or outputs on the evok control panel:

      2fe858c4-5a31-43b2-b49c-2280cc44c5b0-image.png

      The log available on the configuration page of the control panel shows these errors:

      b54cac1a-220c-4bdd-85a1-b3f3a3daa7b1-image.png

      Also, the output of http://neruon-ip/rest/all is as follows:

      [{"glob_dev_id": 1, "last_comm": 0.06825900077819824, "ver2": "1.0", "sn": 119, "circuit": "1", "model": "S103", "dev": "neuron", "board_count": 0}, {"bus": "/dev/i2c-1", "interval": 3.0, "dev": "owbus", "scan_interval": 300.0, "circuit": "1", "do_scan": false, "do_reset": false}]

      Do note the "board:count : 0", is that expected?

      The node-red ui itself with the default flow seems fine, but nothing happens when i try to switch a DO on (the led on the neuron does not light up).

      The hardware itself was working fine with a couple-of-years old image, I believe this must be a software issue, nothing should be wrong with the hardware.

      Any ideas?

      thanks,

      rob

      1 Reply Last reply
      Reply Quote 0
      • R
        rob
        last edited by

        And broken it is.

        I found out I had many SPI CRC2 errors in my kernel logs.
        Looking around I found this post

        It turns out the stock image 20220412.0 for nodered actually ships with the broken revision 1.108 of the kernel module.
        Thanks to @knebb 's instructions I was able to downgrade to v1.106 and my neuron seems to be working fine again.

        I hope someone from the customer support gets to see this post and fixes the image quickly.
        Guys, you have a terrific product line (I bought two neurons and some accessories over the years and I am a very happy customer), but you should really improve the regression testing before releasing: it is not the first time I have problems when trying to use an official image: see here

        I might be able to provide you with some logs in case you need help in troubleshooting on older hardware (S103 S/N 109 from 2017): just contact me in the next couple of days - then I'll have to put the system back on the field.

        rob

        1 Reply Last reply
        Reply Quote 0

        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

        With your input, this post could be even better 💗

        Register Login
        • First post
          Last post