Unipi Opentherm To Modbus MM-OT101 - Communication Problems
-
Good evening,
I tried to connect the gateway referred to in the object to a BAXI boiler, and I noticed that some information I can read while others do not.
For example, I can read the room temperature (address 24), all registers from 2000 to 2010, but many other registers, such as 27 (outside temperature), I cannot read them.
An error appears in the thermostat (error 88E, which means communication problem). The communication problem encountered is however partial, because as mentioned some registers there
I read correctly, others do not (where I do not read the data correctly, I read the value 0).
Can anyone show me how I can solve the problem?
Thank you -
Can you check the statistics registers 2000+ / 2100+?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login