UniPi Neuron M503 Cycle Time
-
Hello everyone,
we bought a UniPi Neuron M503 and are trying to configure it with Mervis.However, we noticed the problem that the cycle time does not even correspond to the one set in the task. As an example, we have built a minimal example that should change the DO_1.01 and DO_1.02 with every cycle. At the output, however, there is only a cycle time of approx. 1 second and not 1 millisecond.
Link to the zipped minimal example: https://cloud.hs-augsburg.de/s/iwXcKfDNRKRDzqw
Please help us. Thank you very much!
Matt
-
Hello @matt90,
the speed of 1ms is very optimistic and in the real life, you will not be able to get it under 10ms with Mervis. The biggest impact on the overall performance has the Autogen functionality and as I can see from the example, you have it configured on all datapoints. Please, take a look at our tutorial about proper settings: https://kb.unipi.technology/en:sw:01-mervis:autogen-hiddenAlso, be aware, that the speed is not deterministic, since the program of the PLC is running in the operating system, sharing resources with other processes.
Best regards,
Martin
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login