RO Variable not responding anymore
-
Hello,
I'm using a Unipi Neuron L203 to control the lights and screens of my house.
As i'm new to Mervis and PLC's i used a very simple setup to control about 18 lights and 2 screens.
Today i wanted to test a direct switch setting for the first time so I ran the unipi - configure module.
Right after running that and confirming the direct switch functionality works i noticed 1 of my lights was not working anymore.
I went back to the original setup and disabled the direct switch setting however that should not be interfering with the light switch that is not working anymore.L203_RO_201_w variable is not responding to any input anymore. All other RO's are responding as before.
I used autogen to generate the variables (i still need to change that if i get better at this). RO_2.01_w seems to be correctly linked to the variable.I confirmed the relay is still working by changing the default value of R0_2.01_w to true.
Any idea what i did wrong? All help is appreciated!

-
Hello @christophev,
please send the Mervis project to [email protected], I'll take a look at it.Best regards,
Martin -
Solved. Thanks for the feedback!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login