Reduce the responce time of Unipi 1.1
-
I have a NiniPi 1.1 complete set
I made a program in simple mode and in full mode.
The response time is very bad.
Description of the program:
when a value of the analogue input has reached a setpoint (setpoint set in the program), an output must be "0". When the value of the analog input has been prepared under setpoint hysteresis (hysteresis set in program), the output must be "1".
The program has 10 different set points.
First, setpoint 1 is used x time, then setpoint 2 is used Y time, then setpoint 3 is used z time, etc.
The responce time is 800ms.
Can someone tell me how I can reduce the response time?User: Holzenbein
-
Hello @holzenbein,
that looks like incorrect usage of Autogen functionality. Please, take a look at our tutorial: https://kb.unipi.technology/en:sw:01-mervis:autogen-hiddenBest regards,
Martin
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login