HMI Interface ?
-
Hi, i need to use a HMI with Neuron xxx, how to interface it?
-
@wavoigt We have tested HMI terminals from weintek like this one https://www.unipi.technology/weintek-mt8051ip-p198?categoryId=29 via Modbus RTU (RS485). Works well but the SW setup is a bit complicated.
Mervis has recently gained BACnet server support so you can connect higher verions of Weintek displays which support BACnet with Neuron or Axon via BACnet/IP
Alternatively Mervis has a web based HMI so you can also use this with any web browser while on the same IP network.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login