Reading values from Siemens PLC using TCP
-
Hi,
I bought Unipi Neuron with a vision of reading Siemens PLC memory and creating web based HMIs for those data. Is it even possible? Can someone point me to some tutorial because there aren´t any texts on how to do that. I am currently using Mervis OS but I cannot find a way to read S7-300 addresses.
Thank you.
-
Hello @somapa,
the first thing is to configure the Siemens PLC as the ModbusTCP slave. Unfortunately we don't have any direct experience with it, so you have to look for help somewhere else. But you can verify the settings with e.g. qModMaster.The second step is to configure generic Modbus slave device in Mervis and we have a tutorial for that: https://kb.unipi.technology/en:sw:01-mervis:connecting-to-modbus-slave-device-hidden
If, in any case, you wouldn't be able to set the Siemens as ModbusTCP slave, you can set the Mervis as ModbusTCP slave and let the Siemens update the registers. You can read more about how to set the Mervis as ModbusTCP slave here: https://kb.unipi.technology/en:sw:01-mervis:setting-modbus-server-hidden
Best regards,
Martin
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login