Mervis 74371 - Analog Out Inverted?
-
Hi,
I just updated my UniPi1.1 devices to the new 1.7OS using Mervis 74371 and recognized that the Analog Out values have been inverted:
formerly int=10.000 meant 0V and int=0 meant 10V
now int=10.000 means 10V and int=0 means 0VDid this happen by accident?
BTW - is there a way to smoothen the AO changerate so I can get rid of the steps? (I see it in my light when dimming up and down)
see for instance here:

Thanks
CKB -
@ckb the inverse behavior of AO was a bug and is now fixed. Since 0 is a default value, most users do not want a default 10V after startup of the application.
You would have to smoothen it in the SW - create your own function block which will add/deduct automatically every a part of the difference |current_voltage-target_voltage| every cycle(or every 0.1s). But honestly, this most probably will also cause visible steps in the dimming process.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login