Problem with attach PLC and upload RT
-
Hello everyone.
I apologize in advance for my english but being french! I use google translation ...: - /
Here, I have an old pc that is still running under vista and I am using it to program my uniPi card.
The problem is that when I do a search with "attach PLC" in "UDP broadcast" mode, this one only finds a uniPi / RPI 2 rev 1
while I have a RPI 3B +.

I specify that I connect the pc and the UniPi / RPI ethernet cable right because being on my boat (I am a sailor) I can not access network configurations.
I tried to manually enter the model and the serial number, it seems to go except that I can not upload RunTime. it puts me: "upload of RT fail".
I also tried leaving the PLC found by itself (RPI2 rev1) but I have the same problem with the RT upload.It's been 3 days that I block above and I go around forums but impossible to find a solution.
I installed Mervis IDE V 2.0.12 (58620).
I tried to put on my SD card all OS images available on the site but that does not change anything.thank you in advance.
-
Hello @frenchy,
RPi 3B+ is not officialy supported. But we will take a look at it but I cannot promise when it will be done.
-
Can I still work with my RPI B3 + or should I buy a RPI2?
The RT download problem comes from there?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login