Raspbian Node-red Support
-
I am trying to get direct access to the Digital In and the relays on the UniPi through Node-red. If I run an i2c scan I can see all the devices as specified in the hardware manual. I can connect I01-I06 & I11 through the rpi-gpio nodes, but no more. Any tips for disabling SPI to free up the other gpio ports? I havn't done the cabling mod for pins 13&14 yet but plan to.
If I can interface with the hardware on the UniPi 1.1 directly I would prefer this as the only reason to use EVOK would be to get the inputs and outputs into Node-red... this would mean i'd skip all the EVOK stuff, less to reconfigure in the case of a hardware failure and less to go wrong software wise.
-
@sjp770 https://www.raspberrypi.org/documentation/hardware/raspberrypi/spi/README.md and also by rpi-config tool
-
@tomas_hora Thanks for the link but it doesn't explain why the gpio ports are unavailable when SPI is disabled. I used the raspi-config method.
-
@sjp770 Ended up being a newer version of Node-Red was required.
I2C relays are still a pain if anyone find a node based solution to those.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login