Dead on arrival?
-
Hi!
I've been testing with my neuron L203 for a few days when I had some time, and it seems that after many attempt, the complete RUN2 section seems to be dead? I've played around with Mervis and Node-RED and I just can't seem to activate any of the relays on this part of the board.
The LED on RUN2 is blinking in a different way than RUN1 and RUN3. It skips every other blink and shows a slightly red LED instead. Didn't notice this odd blinking as I was so focused on staring to use this awesome device. Is there a way to check this on a lower level? I don't want to open the casing, as it would probably void my warranty.
Video of the blinking right here:
https://goo.gl/photos/JwYHHnqJ9g4R2ZBE7Hope to get a quick solution for this issue.
-
Hello @Jan-Teunis,
you can try to run the neuron tcp server in verbose mode
fisrt stop the service by:
systemctl stop neurontcpand then run it by hand by
/opt/neurontcp/neuron_tcp_server -p 502 -vvand paste the output here.
-
Hi Tomas,
I have bought 4 neuron L503 as I need them for my project and I have the same problem. It seems that module 2 does not work ok.
When I run neuron_tcp_server manually the output is:pi@neuron02:~ $ sudo /opt/neurontcp/neuron_tcp_server -p 502 -vv Board on /dev/spidev0.1 firmware=5.0 hardware=0.16 (B-1000-1) pi@neuron02:~ $ -
Hey @tomas_hora ,
This is the output that I got :
Board on /dev/spidev0.1 firmware=5.0 hardware=0.16 (B-1000-1) Board on /dev/spidev0.3 firmware=5.0 hardware=8.16 (E-16Di-1_U-14Ro-1) Board on /dev/spidev0.2 firmware=5.0 hardware=8.16 (E-16Di-1_U-14Ro-1) Board0 PTY0 /dev/pts/1 Starting loop -
@Jan-Teunis Than everything should be working well. The RUN led also indicates if there has been a recent communication with the group (1-3).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login