OWFS server
-
Is it possible to get temperature readings from a OWFS server over the lan tcp/ip

-
Is it possible to get temperature readings from a OWFS server over the lan tcp/ip

-
The thing is that mervis does not uses owfs server but only the 1-wire kernel module. But if you map your temperature sensors in Mervis, you can then pam the variable to a TCP modbus server and there are many libraries and examples online for reading that….
-
OK
I have a OWFS server today I read in about 50 sensors from that, I would like to read in the mervis.
Then I think about and put them directly in UnipiCan Unipi handle 50 1-wire sensors

-
See the documentation: http://unipi.technology/wiki/1Wire_topology but it also depends on your installation
-
OK
I will try to see what happens
Just ordered my second Unipi for lab purposes
My first Unipi control my chillers for my server racks
[attachment=0:zhfhxnxj]System.png[/attachment:zhfhxnxj]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đŸ’—
Register Login