This is where it gets weird. My OWBUS section is as follows :
[OWBUS_1]
owbus = /dev/i2c-1 --i2c=/dev/i2c-1:ALL ; Scanned bus (--i2c=/dev/i2c-1:ALL or localhost:2122 or 'u' for USB dongle)
interval = 3 ; [s] Default sensor reading
scan_interval = 300
That means the scan is 300 miliseconds, correct? I only have one sensor connected, but the Evok web interface still shows values from two sensors...looks like it stopped updating after first read. Any ideas ?