Hello everyone,
we bought a UniPi Neuron M503 and are trying to configure it with Mervis.
However, we noticed the problem that the cycle time does not even correspond to the one set in the task. As an example, we have built a minimal example that should change the DO_1.01 and DO_1.02 with every cycle. At the output, however, there is only a cycle time of approx. 1 second and not 1 millisecond.
Link to the zipped minimal example: https://cloud.hs-augsburg.de/s/iwXcKfDNRKRDzqw
Please help us. Thank you very much!
Matt