Sound card support
the past week I installed an USB audio card into a Neuron M103 and, after a bit of tinkering (e.g. disabling the internal audio card), it all worked fine:
$ cat /proc/asound/cards 1 [Audio ]: USB-Audio - USB Audio Generic USB Audio at usb-3f980000.usb-1.3, high speed
Now I need to do the same change on an Axon M205 but I discovered the sound drivers and modules seem to not be installed as they are part of the standard kernel. The
/proc/asounddirectory does not even exist.
the kernel for Axons is a stock kernel provided by Debian. Can you check how your USB audio card is detected? Unplug it (if already plugged in) and then plug it again and run these commands (the
# dmesg # lsusb
The problem probably lies in missing audio subsystem, which we ofcourse omitted. You can try following any Debian tutorial for installing ALSA or PulseAudio.
Is this answer sufficient for you?
AFAIK the hardware is detected properly:
# dmesg [ 4789.159932] usb 5-1: new high-speed USB device number 2 using ehci-platform [ 4790.663103] input: Generic USB Audio as /devices/platform/soc/1c1d000.usb/usb5/5-1/5-1:1.3/0003:0BDA:4809.0001/input/input2 [ 4790.720706] hid-generic 0003:0BDA:4809.0001: input,hiddev96,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-1c1d000.usb-1/input3 # lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 003: ID 0bda:4809 Realtek Semiconductor Corp. Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
My problem is the ALSA installation:
# apt update ... # apt install alsa-base Reading package lists... Done Building dependency tree Reading state information... Done Package alsa-base is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'alsa-base' has no installation candidate
The system is a stock UniPian with very few customizations (created a user, added some packages, configured network and SSH and a few more)... nothing sound-related though.
Further investigation shows the sound driver is provided by
linux-image-4.9.0-9-arm64but the active kernel is
# apt-file search snd-usb-audio linux-image-4.9.0-9-arm64: /lib/modules/4.9.0-9-arm64/kernel/sound/usb/snd-usb-audio.ko linux-image-4.9.0-9-arm64-dbg: /usr/lib/debug/lib/modules/4.9.0-9-arm64/kernel/sound/usb/snd-usb-audio.ko # uname -a Linux sicur19a 4.14.52 #37 SMP Mon Nov 5 12:29:14 CET 2018 aarch64 GNU/Linux
Not sure what to do now... I would try to install and enable the stock kernel (4.9.0) but I was fearing unintended consequences. Let me know it this is not a problem.
@ntd Downgrading of the kernel could work, but it is never the correct solution, since you will not receive updates.
The alsa-base image is not the correct one: https://packages.debian.org/search?suite=all&searchon=names&keywords=alsa-base
The preffered sound system in Debian is PulseAudio, so try following this information: https://wiki.debian.org/PulseAudio
Downgrading of the kernel could work, but it is never the correct solution, since you will not receive updates.
But this is not a downgrade:
linux-image-4.9.0-9-arm64is the default kernel of Debian Stretch. The 4.14.52 kernel is provided by your package (
axon-kernel), that is by default UniPian does not use the stock Stretch kernel image. I suppose this was due for some reason and I'd like to know if I can just ignore those reasons and use the default kernel.
Regardling pulseaudio I cannot see how it can work without the proper sound kernel module loaded. I just tried anyway (it is quite tricky because the info provided expects a running desktop environment) and the result is no card found:
$ pactl list cards $
I don't have any USB sound card here at the moment, but I googled "headless pulseaudio" and so far this tutorial looks OK:
The only change I did is in the first command, to which I added --no-install-recommends and it omitted the GUI stuff:
sudo apt-get install libasound2 libasound2-plugins alsa-utils alsa-oss --no-install-recommends
Again, changing kernel in embedded devices is the latest thing you should do. And I am sorry for the misinformation about the stock kernel vs. kernel provided in axon-kernel package, you are correct.
Yes, this is exactly what I followed before writing the previous post. The only sink listed is a dummy output that I suppose you see too:
$ pacmd list-sinks 1 sink(s) available. * index: 0 name: <auto_null> driver: <module-null-sink.c> ... properties: device.description = "Dummy Output" device.class = "abstract" device.icon_name = "audio-card"
As stated above I'm pretty sure this is because of the sound kernel modules not loaded.
An alternative approach would be to install the 4.9.0 image without enabling it and try to force-load the needed sound modules with the current kernel. Do you think it is worth a try?
Don't be mistaken: I really appreciate your help so far and I know this could be considered a kind of corner case.