Codesys Neuron Digital Output/Relay Output issue
-
Hi All!
Newbie question:I have a Neuron m203 codesys setup. I am having trouble accessing the digital output and relay outputs on the device.
I cant seem to find any documentation on this.
I understand the the IO's are accessible via Modbus TCP (master ) and not gpio . I cant seem to figure out how to assign variables to the various outputs. I assumed I would be able to assign a variable to the I/o same as gpio outputs. Doesn't seem to be the case.What the heck am I missing? Thanks in advance!
-
Hi @dnevin,
do you have the UniPi Neuron driver for CODESYS (https://store.codesys.com/unipi-neuron-for-codesys-sl.html)?Martin
-
Hi Martin .
Yes I purchased ..installed .the licensed the neuron for codesys addon.
-
The outputs are assigned as for any IO device in CODESYS. Please check the CODESYS help for how to map IO.
There is also a UniPi Neuron library included in the package which makes it easier to handle the data types which span more than one register. Please see the help for the library in CODESYS.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login