Analog out connection
-
Have I got the guide right as shown below

[attachment=0:1ik92v4u]Analog4.jpg[/attachment:1ik92v4u] -
Have I got the guide right as shown below

[attachment=0:1ik92v4u]Analog4.jpg[/attachment:1ik92v4u] -
If you want to use external power supply, you do not need to make connection to the AI- and definitely not to 12V!
Just connect the positive pole to AOV, negative to AOG.
By the way, minimum voltage on the AOV is 12V in order to be able to get 10V on the AO.
-
Ok I connect like this when I should use power from Unipi
[attachment=1:1kdnxhhn]Analog1.jpg[/attachment:1kdnxhhn]and I connect like this when I use an external power supply
[attachment=0:1kdnxhhn]Analog11.jpg[/attachment:1kdnxhhn] -
Right

-
ok tanks

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login