Converting values of analog inputs
-
How do I convert from AI1 0-10V in to 0-100% out

-
How do I convert from AI1 0-10V in to 0-100% out

-
You do not need to convert it…. 0V means 0%, 10V means 100%, so 2.5V means 25%
-
I must be doing something wrong
I've set the input sa below
[attachment=1:2e2kb6cs]Analog1.jpg[/attachment:2e2kb6cs]
but the value shown is wrong
[attachment=0:2e2kb6cs]Analog2.jpg[/attachment:2e2kb6cs]
it should be 2.4 bar and not 2426.8 Bar -
The value of Ai is presented in mili Volts, so all you need to do is divide by 1000. Try playing with the X2 value

-
Perfect thanks now it works.

[attachment=0:a28bpy12]Analog3.jpg[/attachment:a28bpy12]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login