8-Relay Addon EMO-R8 on unipi 1.1.light
-
is it possible to connect the 8-Relay Addon EMO-R8 to unipi light via the GPIO Connector and using evok?
-
Hi @juntiedt,
Yes, it is possible. On the Unipi 1.1 Lite there is a GPIO connector where the necessary GPIOs are available.
A description of the GPIO connector is available in the Unipi 1.1 Lite documentation. The description of the RJ11 connector on the EMO-R8 is directly on the board.
Best regards,
Antonin, Unipi
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login