One wire how to connect
-
Hello,
If i read the documentation well, the one wire thermometer is connected via an one-wire IC.
This IC is connected to the I2C-bus.When i configure the I2C-bus, i can't chose the one-wire thermometer.
Does anyone know how to connect te one-wire thermometer and how to configure it in mervis?
Kind regards,
Frans Sleddens
-
Hello,
If i read the documentation well, the one wire thermometer is connected via an one-wire IC.
This IC is connected to the I2C-bus.When i configure the I2C-bus, i can't chose the one-wire thermometer.
Does anyone know how to connect te one-wire thermometer and how to configure it in mervis?
Kind regards,
Frans Sleddens
-
You need to create a channel for each bus, you cannot add 1Wire device to different bus. So add a new channel - PlaformIO - 1Wire and than add 1Wire device as you like.
You only need to add the 8channel 1Wire expander to the I2C bus but not the ONBOARD IC - that runs by default.
-
Hello Thomas,
thanks for the quick answer.
Il try it this week.Kind regards,
Frans Sleddens
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login