Image restore problem
-
Hello,
Using the backup tool : backup2usbI therefore made an image on a usb key
I made the original image from the axon S105, SN: 300
When I restore my image on the axon M205, SN: 123. Everything works correctly
But on the other hand when I restore the same image on the axon S105 SN: 357. It does not work correctly, the system seems to restart continuously with regard to the diodes of the network connector.
I do not understand why, the material seems to be the same.
Is there a way to debug the system boot ? : serial port, log file ...
thank you