Controlling FAN 0-10V - wiring needed
-
Hi guys,
I have a fan which can be controlled by 0-10V or PWM. As I am struggling with electronics I prefer the easiest way without diodes or similar.
I own a Neuron M503 which has an analogue output of 0-10V or PWM. Additionally I have a 48V power supply for the fan.Here are the possible connections for the fan:

Can you guys tell me the wiring cable to get this fan controlled by Neuron (settings the modbus parameter is not a problem)?
Thanks a lot!
/KNEBB
-
Replying to mysqlf as I found a nice guy who did the cabling for me.
As I want to control two vents the wiring has been extended accordingly:

So for each vent I need a 47k resistor and a 12V diode.
That's it! Easy for someone who knowns. Impossible to do it for me.
/KNEBB
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login