1-Wire 8 port hub, switched star topology
-
Hi,
I have to use star network topology due to the local conditions in my installation. Unfortunately the lines are long and with different lengths. I use several 1-Wire temperature sensors (DS18B20) witch works fine individually but not with together.
So, I have to use switched network for for reliability.
My question is: The 1-Wire 8 port hub is a active (switching hub)? Is it suitable for me?
(The 1-wire master is from different manufacturer).Thanks in advance,
Istvan -
Hi @Csevi,
in short - the 1-Wire hub is passive device, which helps with the "linearization" of the star topology. You can find complete information about 1-Wire here: https://kb.unipi.technology/en:automation:02-glossary:1wire-hiddenBest regards,
Martin
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login