Recommended way of connecting I2C device
-
Hi,
what is recommended way of connecting I2C device consuming up to 85mA to UniPi 1.1?Let's say I want to connect LiDAR Lite V3HP sensor to UniPi 1.1 over I2C Rj11 interface.
Would you recommend to use +5V from RJ11?

Or rather use external power-supply?

Thanks for answer in advance:)!
-
Hi,
You can use power from the I2C connector for this current. The 5V pin in the I2C connector is directly connected to the 5V power supply from the DC connector.
If you want to be sure, use the capacitor (1000 μF) mentioned in the article on the sensor.
-
ok, thx for feedback
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login