• Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    DI Extension to UniPi 1.1

    Scheduled Pinned Locked Moved Unipi Extension Modules
    4 Posts 2 Posters 1.7k Views 1 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      CKB
      last edited by

      Guys,

      Isn't there any chance to extend the amount of DI to the unipi other than buying more unipis?
      In the meantime I have 3 unipis, 1 AO board & 8 relay boards so far. Now I just need more DI to connect additional switches for manual control of the home automation.

      Isn't there any elegant, of-the-shelve solution which collects the switch activity locally and communicates it to the unipi through the network (either modbus, sccp or other)?

      In the past you had DI extension boards, but more often your products are discontinued, which prevents me to perform an upgrade to Neuron, Axon or other successing PLCs of yours. This makes it difficult for those who supported you from the very beginning...

      Any ideas are welcome!

      Thanks
      CKB

      Martin KudláčekM 1 Reply Last reply
      Reply Quote 0
      • Martin KudláčekM
        Martin Kudláček @CKB
        last edited by

        Hello @CKB,
        we don't have DI board per-se, but you have (at least) two choices:

        1. Use Unipi Extension and connect it to the Unipi 1.1 via USB/RS485 converter. The configuration then depends on the SW you are using.
        2. Use another Unipi 1.1 board and communicate with it over ethernet, as you suggested. The communication protocol depends on the SW you are using - in case of Mervis the SSCP is the best way.

        Best regards,
        Martin

        1 Reply Last reply
        Reply Quote 0
        • C
          CKB
          last edited by

          Hi Martin,

          'The module (...) is compatible with both Unipi Neuron and Unipi Patron controllers, as well as PLCs from other vendors' - so it's compatible as well with Unipi 1.1 then?

          Is there an extension module with only DI planned for the near future?

          Cheers
          CKB

          Martin KudláčekM 1 Reply Last reply
          Reply Quote 0
          • Martin KudláčekM
            Martin Kudláček @CKB
            last edited by

            Hi @CKB,
            the Unipi Extensions are generic ModbusRTU slaves. Since they communicate over RS485 and Unipi 1.1 doesn't have any, you need to use USB/RS485 converter.

            Best regards,
            Martin

            1 Reply Last reply
            Reply Quote 0

            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

            With your input, this post could be even better 💗

            Register Login
            • First post
              Last post