Extension xG18 on unipi 1.1
-
Hallo Unipi Team,
I am new to Modbus and now want to connect Extension xG18 to my unipi 1.1.
What is the evok interface to modbus?
How can I access modbus through evok?
Is there a connection cable coming with the Extension xG18 device?
The Extension xG18 will be about 5 to 6 meter away from my unipi 1.1.
Any info/help appreciated -
Hello @juntiedt,
the Unipi 1.1 doesn't have RS485 interface, so you need to use some RS485/USB converter. The latest Evok has support for xG18, you just need to set it in the /etc/evok.conf as a normal Unipi Extension.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login