L403 Relaygroup 3 not working
-
The 403 runs well for 18 months.
Now I had a problem with the SD-Card.
So I created a new one using the same Image from unipi dated 2019.
After reboot i can Access the Groups 1 and 2. The LEDs RUn1 and RUN2 are green.
But RUN3 is off, not red.After that I created a second SD-Card using the newest Image with the result that all RUN-LEDs are off.
Any ideas?
Best regards Jürgen
-
Hello @juergen,
please send the serial number of your L403 to [email protected]. I'll check what firmware you might be running.Thank you and have a nice day,
Martin
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login