Weintek MT8051ip > Unipi M203
-
Hello, I'm new at working with the Unipi PLC in combination with
a Weintek HMI. I want it to work trough network or RS485. The only thing i want it to do is switch some lamps and a light dimmer (and more in the future). I try to understand the HMI and i got it well working. The only problem is to get the relay output working on the M203. I'm new at working with Mervis IDE. Maybe anyone can help me a bit? I'm working on a unit for a ear/nose doctor for a hospital. Maybe someone in The Netherlands that can help me out remotely? Thnx in regard. -
Hello John-paul,
the communication between Axon and Weintek can be over ModbusRTU or BACnet/IP. I strongly recommend to use the latter - BACnet/IP. For both types communications, we have tutorials for configuration in MervisIDE:
https://kb.unipi.technology/en:sw:01-mervis:weintek-hmi-bacnet-mervis-hidden
https://kb.unipi.technology/en:sw:01-mervis:weintek-ip-series-hidden
-
Hello Martin,
At this moment i got everything working good with BACnet/IP. It is working very fast. All the buttons are (except the dimmer function) connected to the relay outputs,
Now i need to programm a dimmer on de M203. I want to use the AO for 1-10 volts to regulate a led dimmer module. I need to find that out, never did that before.
Thanks for your help.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login