UniPi L503 - mervis - Analog output 0-10V | value 0-100
-
In a program with dimmers we use the AO's to dim a 0-10V module.
That works fine, but it is not clear to us why the analoge output has a 0-10V voltage, and a 0-100 value(in the properties of mervis). Where the first 0-10 value represents the 0-10V on the exit.
How can we use the 0-100 value that represents the 0-10V on the exit (example a value of 25 would result in a 2.5V on the output).
If it would not be clear: When we now reach a value of 10 we have already reached the 10 volt on the output, the other 90 values, do not make any difference.Is there a solution for this (some configuration,...)?
-
Hello @bart-delaere,
the easiest way is to use a simple DIV function block, via which you will divide the setpoint variable value by 10 before sending to AO:
More systematic way, yet more prone to errors, is to use transformation on the write variable:

Best regards,
Martin
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login