Hot tub controller with UniPi 1.1
-
I found a used hot tub online, that's a couple of years old and I decided I can make a cool project out of it. The built-in controls were already annoying and time-consuming, so that gave me further reason to tinker with it. In order to save energy, I lower the pool temperature when not used, but if I wanted to use the hot tub, I had to turn the temperature up 4 hours in advance. As an example of what I mean by saying annoying: In order to save energy, I had to lower the pool temperature when not used, but if I wanted to use the hot tub, I had to turn the temperature up 4 hours in advance. Another thing that happened was that somehow the circulation pump decided to turn on randomly during the night - that would probably have gotten under control if I had read the manual, but as a tinker I prefer to tear out the controls and use an UniPi 1.1 instead.
With the UniPi and running nymea on it, I was able to turn on/off each pump, set the hot tub mode "Ready" or "Summer", check the temperature and switch the blower. With the remote connection I can now preheat the hot tub before I come home and get a push notification when the hot tub reaches it's target temperature.
See the full project description here:
https://www.hackster.io/124582/open-source-hot-tub-controller-e0a1f3
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login