PiDome
-
Have anyone tried pidome with UniPi ? Looks promising ! At the server installation part he says :
Prepare RX/TX GPIO pins
By default on the GPIO RX/TX pins of the raspberry pi, a serial console is available. So, we are going to disable this so the server can use these pins as common COM ports (But running on 3.3 volts and not 12 as default for COM ports!).
I suggest to follow the instructions mentioned at http://elinux.org/RPi_Serial_Connection. I believe this is the most up to date version to alter the use of the RX/TX pins.Can i do that or i may have promblem with the UniPi ?
-
Have anyone tried pidome with UniPi ? Looks promising ! At the server installation part he says :
Prepare RX/TX GPIO pins
By default on the GPIO RX/TX pins of the raspberry pi, a serial console is available. So, we are going to disable this so the server can use these pins as common COM ports (But running on 3.3 volts and not 12 as default for COM ports!).
I suggest to follow the instructions mentioned at http://elinux.org/RPi_Serial_Connection. I believe this is the most up to date version to alter the use of the RX/TX pins.Can i do that or i may have promblem with the UniPi ?
-
Hello,
the Pidome looks interresting. I will take a closer look at it.
You shall have no problems at all. The UART pins are wired out directly to one the RJ11 connectors of UniPi.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login