Acces Group 2 and 3 at Neuron L503
-
Hey Guys,
if've got a problem to get acces to the In and Outputs from Module 2 and 3.
In Codesys there are only the Channels for Group 1 registerd.

Do anyone kow, how to acces the other Groups?
Thank You!
-
Hi Yannick,
Please look in the datasheet that can be downloaded from the CODESYS store along with the software. In there are instructions for accessing channels in groups 2 and 3. Basically you created channels as you would in a standard codesys modbus device (although all registers and coils are identified by name. You then map these into your application. There are a number of utility function blocks in the library that may be helpful.
Group 1 is the same across all Neuron devices, so I created the drivers to automatically create channels and map the data into an automatically created function block. If users find this helpful then I could do the same for the other groups. I would be interested to hear if users find this automated mapping helpful, or if they prefer to map the channels used themselves.
regards David
-
Thank you very Mutch, thats what I'm looking for.
Now if´ve got it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login