M203 clean evok install not working
-
Hi,
I bought an M203, and flashed the official UniPian Neuron OS image available here
Trying to access the web interface showed an empty list of inputs and outputs, nothing was working:So I tried an apt-get dist-upgrade followed by a manual installation of latest evok 2.0 as per instructions available here
Rebooted, I get the same result.
Here is the log I get when launching evok manually as instructed in the debug section of the documentation:
pi@M203-sn100:/etc $ sudo python /opt/evok/evok.py
[I 180106 15:58:02 config:66] eprom: UniPi Neuron M203 version: 1.0 serial: 0x64
[I 180106 15:58:02 evok:1640] Starting using config file /etc/evok.conf
[I 180106 15:58:02 config:78] YAML Definition loaded: CUSTOM MODBUS DEVICE.yaml, type: 3, definition count 0
[I 180106 15:58:02 config:78] YAML Definition loaded: S10x.yaml, type: 3, definition count 1
[I 180106 15:58:02 config:78] YAML Definition loaded: M30x.yaml, type: 3, definition count 2
[I 180106 15:58:02 config:78] YAML Definition loaded: M20x.yaml, type: 3, definition count 3
[I 180106 15:58:03 config:78] YAML Definition loaded: L20x.yaml, type: 3, definition count 4
[I 180106 15:58:03 config:78] YAML Definition loaded: M50x.yaml, type: 3, definition count 5
[I 180106 15:58:03 config:78] YAML Definition loaded: xS30.yaml, type: 3, definition count 6
[I 180106 15:58:03 config:78] YAML Definition loaded: L51x.yaml, type: 3, definition count 7
[I 180106 15:58:03 config:78] YAML Definition loaded: L40x.yaml, type: 3, definition count 8
[I 180106 15:58:04 config:78] YAML Definition loaded: xS40.yaml, type: 3, definition count 9
[I 180106 15:58:04 config:78] YAML Definition loaded: M40x.yaml, type: 3, definition count 10
[I 180106 15:58:04 config:78] YAML Definition loaded: L30x.yaml, type: 3, definition count 11
[I 180106 15:58:04 config:78] YAML Definition loaded: L50x.yaml, type: 3, definition count 12
[I 180106 15:58:04 config:78] YAML Definition loaded: M10x.yaml, type: 3, definition count 13
[I 180106 15:58:05 config:78] YAML Definition loaded: xS50.yaml, type: 3, definition count 14
[I 180106 15:58:05 config:78] YAML Definition loaded: DALI.yaml, type: 3, definition count 15
[I 180106 15:58:05 config:78] YAML Definition loaded: xS10.yaml, type: 3, definition count 16
[I 180106 15:58:05 config:78] YAML Definition loaded: evok-alias.yaml, type: 2, definition count 0
[I 180106 15:58:05 evok:1704] HTTP server listening on port: 8080
[I 180106 15:58:05 modbusclient_tornado:125] SPI client started
[I 180106 15:58:05 neuron:173] Reading SPI boards
[I 180106 15:58:05 neuron:188] No board on SPI 1
[I 180106 15:58:05 neuron:188] No board on SPI 2
[D 180106 15:58:05 owclient:376] Entering 1wire loop
[I 180106 15:58:05 neuron:188] No board on SPI 3
[E 180106 15:58:05 config:358] Invalid device circuit number 1_01
Traceback (most recent call last):
File "/opt/evok/config.py", line 353, in add_aliases
dev_obj = Devices.by_int(dev_pointer["dev_type"], dev_pointer["circuit"])
File "/opt/evok/devices.py", line 67, in by_int
raise Exception('Invalid device circuit number %s' % str(circuit))
Exception: Invalid device circuit number 1_01
[E 180106 15:58:05 config:358] Invalid device circuit number 1_02
Traceback (most recent call last):
File "/opt/evok/config.py", line 353, in add_aliases
dev_obj = Devices.by_int(dev_pointer["dev_type"], dev_pointer["circuit"])
File "/opt/evok/devices.py", line 67, in by_int
raise Exception('Invalid device circuit number %s' % str(circuit))
Exception: Invalid device circuit number 1_02
[E 180106 15:58:05 neuron:227] 'NoneType' object has no attribute 'do_scan'
Traceback (most recent call last):
File "/opt/evok/neuron.py", line 225, in scan_boards
yield self.modbus_cache_map.do_scan()
AttributeError: 'NoneType' object has no attribute 'do_scan'
[E 180106 15:58:06 neuron:227] 'NoneType' object has no attribute 'do_scan'
Traceback (most recent call last):
File "/opt/evok/neuron.py", line 225, in scan_boards
yield self.modbus_cache_map.do_scan()
AttributeError: 'NoneType' object has no attribute 'do_scan'
[E 180106 15:58:06 neuron:227] 'NoneType' object has no attribute 'do_scan'
Traceback (most recent call last):
File "/opt/evok/neuron.py", line 225, in scan_boards
yield self.modbus_cache_map.do_scan()
AttributeError: 'NoneType' object has no attribute 'do_scan'
[E 180106 15:58:07 neuron:227] 'NoneType' object has no attribute 'do_scan'
Traceback (most recent call last):
File "/opt/evok/neuron.py", line 225, in scan_boards
yield self.modbus_cache_map.do_scan()
AttributeError: 'NoneType' object has no attribute 'do_scan'
[I 180106 15:58:07 web:2063] 101 GET /ws (::1) 6.00ms
[D 180106 15:58:07 evok:169] New WebSocket client connected
[I 180106 15:58:07 web:2063] 304 GET /rest/all (::1) 6.26ms
[E 180106 15:58:07 neuron:227] 'NoneType' object has no attribute 'do_scan'
Traceback (most recent call last):
File "/opt/evok/neuron.py", line 225, in scan_boards
yield self.modbus_cache_map.do_scan()
AttributeError: 'NoneType' object has no attribute 'do_scan'
^C[I 180106 15:58:07 evok:1779] Shutting downIs there something wrong with my hardware? It seems to me the RPI can not communicate with the internal plc boards.
Or is it a configuration mistake? What could I possibly have done wrong?I'll be very grateful to anyone who could shed some light.
Thanks!Rob
-
Quick update:
I repeated the Evok installation as per the instructions above on a clean vanilla raspbian stretch image taken from the official raspberry pi repo (not the UniPi customized one) and everything works fine.
Thus - there seems to be some misconfiguration in the official UniPi image, at least when used with M203: beware.
Rob
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login