Adding Extensions to Evok
-
I've a hard time to add an extension to evok, I tried different settings in the /etc/evok.conf - no success. Found also no documentation about the extensions and how to add them without using mervis.
-
To be more specific I use Raspbian GNU/Linux 9.1 (stretch) with a Neuron L40x and a xS30 Extension.
/etc/evok.conf:
;[EXTENSION_1] device_name = xS30 modbus_uart_port = /dev/extcomm/0/0 allow_register_access = False scan_frequency = 2 scan_enabled = TrueDIP switches on the extension are all OFF, cable length 30cm
-
Hi
use[EXTENSION_1] global_id = 2 device_name = xS30 modbus_uart_port = /dev/extcomm/0/0 neuron_uart_circuit = 1_01 allow_register_access = True address = 15 scan_frequency = 2 scan_enabled = True baud_rate = 19200 parity = N stop_bits = 1Regards
-
Thanks, worked out for me
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login