howto for 1-wire temperature via nodered?
-
Hi there,
I have just started, using unipi 1.1 + rpi3 and running rodened+evok
Excuse me my dummy question but i cannot find any informaiton howto read temperature of a 1-wire temperature sensor
Do I need to install owfs for this or can I just read the temerature via a function node?
How do I get the address of the 1-wire temperature sensor?
Do i need to configure anything before 1-wire works?Sorry many perhaps dummy questions but would be great if you can point me into right direction or have an example.
Many thanks
jens -
this is solved; for all others who have same problem enclosed my solutions. Any comments and improvements welcome
howto for 1-wire temperature via nodered?](/topic/444/howto-for-1-wire-temperature-via-nodered``` -
@jens
Hi
and where is the solution ?Regards
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login