Hi,
i'm try to build S103 + xS10 + xS30 + xS40 in this order but not works

With only S103 + xS10 ( with software configuration = all dip to 0 ) it's works fine, but it's change any dip it's don't works

set xS10 with DIP Off / Off / On / Off / Off / Off / Off / Off = NoEnd + Addr 1 + 19K + Even
set xS30 with DIP Off / Off / Off / On / Off / Off / Off / Off = NoEnd + Addr 2 + 19K + Even
set xS40 with DIP On / Off / On / On / Off / Off / Off / Off = End + Addr 3 + 19K + Even
On S103 = Dip On = End
On Mervis = create serial with Modbus / Serial / on S103...RS485, 19K, Parity Even, Stop One
For HW connectivité use Pair take in RJ45 cable, and all it's fixe on DIN rail
A = A = A = A and B = B = B = B
Not works, in system monitor all trame it's "WRONG"
In Documentation no information for Stop Bit, and no information for DIP S103