Posts made by petr.skvor

hi @marko2276,
Thank you for sharing your integration.

I am a beginner and now I used it for HA communication with NEURON M203 via EVOK layer. Installation of the integration and configuration of the LIGHT sensors (I used for DO and RO outputs) are fast and functional. Turning on/off the relay on M203 has a small response:

When I added the BINARY sensors (DI) configuration, the problem already arose => LIGHTs do not work at 100%:

I always check the configuration in Developer Tools before restarting HA:

#UNIPI NEURON via EVOK
unipi_neuron:
  - name: "neuron5"
    type: M203
    ip_address: 192.168.88.20
    reconnect_time: 30

light:
  - platform: unipi_neuron
    device_id: "neuron5"
    devices:
    - name: svetlo_garaz
      device: relay
      mode: "on_off"
      port: "1_02"
    - name: svetlo_dilna
      device: relay
      mode: "on_off"
      port: "1_03"
    - name: svetlo_vcelin
      device: relay
      mode: "on_off"
      port: "1_04"
    - name: svetlo_zidky_1
      device: relay
      mode: "on_off"
      port: "2_05"
    - name: svetlo_zidky_2
      device: relay
      mode: "on_off"
      port: "2_06"
    - name: svetlo_zidky_3
      device: relay
      mode: "on_off"
      port: "2_07"
    - name: majacek_svetlo_zelena
      device: relay
      mode: "on_off"
      port: "2_08"
    - name: blikac_fasadni
      device: relay
      mode: "on_off"
      port: "2_11"
    - name: svetlo_fasada_garaze
      device: relay
      mode: "on_off"
      port: "2_12"
    - name: majacek_svetlo_zluta
      device: relay
      mode: "on_off"
      port: "2_13"
    - name: majacek_svetlo_cervena
      device: relay
      mode: "on_off"
      port: "2_14"

binary_sensor:
  - platform: unipi_neuron
    device_id: "neuron5"
    devices:
      - name: tlacitko_svetlo_fasada
        device: input
        port: "1_01"
      - name: tlacitko_svetlo_garaz
        device: input
        port: "1_02"
      - name: tlacitko_svetlo_dilna
        device: input
        port: "1_03"
      - name: tlacitko_svetlo_vcelin
        device: input
        port: "1_04"
      - name: kontakt_dalkove_ovladani_A
        device: input
        port: "2_01"
      - name: kontakt_dalkove_ovladani_B
        device: input
        port: "2_02"
      - name: tlacitko_otevreni_vrat
        device: input
        port: "2_03"
      - name: tlacitko_zahradni_zalivka
        device: input
        port: "2_04"
      - name: kontakt_vrata_v_pohybu
        device: input
        port: "2_05"
      - name: kontakt_vrata_zavrena
        device: input
        port: "2_06"
      - name: kontakt_vrata_otevrena
        device: input
        port: "2_07"
      - name: kontakt_vrata_prekazka_v_zavreni
        device: input
        port: "2_08"
      - name: tlacitko_opusteni
        device: input
        port: "2_09"
      - name: kontakt_PIR_osoba_vgarazi
        device: input
        port: "2_10"
      - name: kontakt_kour_v_garazi
        device: input
        port: "2_11"

Could you advise me where the problem could be?

I would also like to use this integration on the NEURON L303 and L403, where I have connected analog inputs, analog outputs, and 1-Wire temperature, humidity, and lighting sensors. Will you please complete the configuration for these mentioned inputs and outputs as well?

I look forward to your reply
Petr