Ok i was too fast, i updated the RT now connection an deploying solution works fine.
Best posts made by iVar
-
RE: MervisIDE <_> neuron
Latest posts made by iVar
-
RE: WiFi instead NIC [Mervis]
Do not blow this up to the sky.
I already have WiFi 1 meter away from Neuron, so no expenses for that.
At us is like that if anything wil be burned, that the overcurrent will come over PHONE LINE, electricity is NOT the problem anymore, we solved that out few years ago, and now is not the issue anymore.
If i put the surge protector(belive me i tryed that) it is blown too and i have two expenses, surge protector and router, if i use only wifi i only change router and that's it.
But this router is "blown-burned" only if nobody is home, that happends werry rearly, but it happends, if anybody is home all you need to do is unplug the DSL line and NO problems at alll.What about that WiFi connection is not so 100% like wired is ordinarry BS, before Neuron i made automation by myself and it was runing wirelesly for 3 YEARS with any problem at all, it was not burned by lightning, line was woking 24/7 and i NEVER had wireless connection problem at all, so that is why i want to connect Neuron wirelesly, i could use eg. wireless extender if there was a problem and put between extender and Neuron a UTP wire, and let between extender and router be a wireless connection, that would be even better than the RPI3 onboard wireless.
But i can go on but i think i explained why i need wifi connecton.PS. All power for mixing walves, pumps and Neuron itself, are connected over 2kW UPS (i know that is an overkill), that anything make and come trough all pover protection for the house, will rather destroy the UPS before all other things that are connected to UPS, at least i hope so.
-
RE: WiFi instead NIC [Mervis]
Ok, it is nice to hear that. But can someone give me step by step instructions, because i do not understand the linux system language and function. I would really appreciate that, so lightnings von't destroy raspberry pi anymore.
Thank you !!
Bostjan
-
WiFi instead NIC [Mervis]
Hello,
I use neuron since it come out and it works flawlesly. But i have one big problem, when there is a storm outside, with lightning strikes, if nowbody is home, to disconnect all, there always something connected to a pdone line(DSL) leaves the smoke and stops working.
My question is, there is a wifi module on raspberry pi 3, how to enable it and configure to connect to my acess point 1 meter away from neuron, that is close enough and should work fine and storm will not harm the raspberry ?
-
RE: MervisIDE <_> neuron
Ok i was too fast, i updated the RT now connection an deploying solution works fine.
-
RE: MervisIDE <_> neuron
Thank you for so quick response.
Now i can connect but, now i have this error.
"Error PLC 0 1 Target controller is running old runtime, update is required"
Bostjan
-
MervisIDE <_> neuron
On Neuron 203, yesterday i installed, on SD card "jessie-2016-07-29" image, there was no problem to connect with MervisIDE, today i installed "jessie-2016-11-04" on SD card MervisIDE cant connect to neuron any more.
Yesterday when i vas testing the neuron, there was no way to set any ouotput reelay to work, also in settings i could not find the right reelay board.
Anybody has same problems ?
Bostjan