Recommended way of connecting analog sensor
-
Hi,
I've bought UniPi 1.1.I would like to connect URM09 distance sensor analog output to one of analog inputs on UniPi 1.1. Please, notice that sensor is single-ended analog sensor working on 5VDC.
What is the recommended way of connecting the URM09's analog output to one of analog input on UniPi 1.1?
I thought about connecting A1- to GND and A1+ to output of the sensor.
But in that case I will not know what is the reference voltage and i need to properly calculate the voltage on analog input.Vref = (ADC * Vref) / 4294967296
4294967296 is ADC resolution, i know it from analog input tutorial.
-
Hi,
The sensor output is 0-5 VDC. The analog input on the Unipi 1.1 measures in the range 0-10V. Directly measured voltage values are available in EVOK, so it is not necessary to perform further calculations.
You can connect the sensor as you type: connect the ground (-) of the sensor to AI- and connect the analog output (A) of the sensor to AI+.
-
Thx for explanation!