@tomas_hora Hi again Tomas, sorry but I really am like a total noob and couldn't understand how to use your code. Also what is a IC? Did you mean I2C?
Also I'm not soldering, so no worrys :)
Thanks for your patience
Latest posts made by Kitaps
-
RE: 1-Wire: Send bits to DS2408
-
RE: 1-Wire: Send bits to DS2408
@tomas_hora Thank you Tomas, I'll check it out. And don't worry for the realtime reactions. This are things that will be on for hours so some minutes more or less won't make a difference.
-
1-Wire: Send bits to DS2408
Hi everybody,
I've worked a bit with the RPi before but I'm still a total noob.
What I wanted to ask is how to get a Signal from the UniPi to a controller (the DS2408, which takes 8-bit signals).For startes I don't even know what software to use. I have been looking and trying. I had no results with Evok. I found OWFS (+Python-OW) but didn't get it to run on my UniPi, and then I have seen Mervis and FHEM but haven't tried those out jet.
As I told you, I'm a total noob and your help would be greatly appreciated. I have been having this problem for 2 weeks.
Thank you very much,
Patrick(By the way what I finally want to do is to control a heating network trough the office. This throug various Thermostates that are set by an Voltage. Lets say 10V<-->Max, 0V<-->Off)